Samsung SCX-8030ND Series - Page 323

7.Trouble
s
● Code :
C3-1211
C3-1312
● Error message :
Imaging Unit Failur
e
Imaging Unit Failur
e
● Symptom / Cause :
1. The machine could not detect the imaging unit.
2. TC sensor Read Error
3. Temporary hard stop.
● Troubleshooting method :
1. Remove the Imaging Unit.
Clean the terminal of the imaging unit and re-install
2. Check TC sensor unit and TC sensor harness.
Check
Deve
-
Clutch (in Main Drive unit) unit
Check
Deve
-
Clutch
(in
Main
Drive
unit)
unit
.
3. Print the supply information report and check the lif
e
If the life has reached the end, replace with a new i
m
● Replacement part
MLT-R607K : Imaging Unit
Service Manual
SCX-8030/8040 series
7-
3
s
hooting
e
:#C3-1211. Please turn off then on.
e
: #C3-1312. Install imaging unit again.
it.
e
remaining of imaging unit.
m
aging unit.
SAMSUNG ELECTRONICS
Version 0.05
3
0