Sanding STS-752RC - Free-Coding; Checking Tie

39
Focus on the second prism, and press All
(or DIST + RECORD).
【Hidden Point】
Meas second prism!
PtID
:
2
HZ
:
50°20′50″
V
:
102°40′00″
Ⅰ
:
----.--- m
Mem.
All
DIST
RECORD
ROD/ED
After measuring these 2 prisms, the result
will show.
Press FIINISH to save the result.
Press REMEAS to measure again.
【Hidden Point】
PID
:
12
Desc.
:
------
X/N
:
102.205 m
Y/E
:
98.021 m
H/Z
:
96.247 m
FINISH
REMEAS
If the result is over the tolerance, press
ACCEPT to accept the difference. Or
press REMEAS to measure again.
【Hidden Point】
Over!
Limit
:
0.010 m
Diff.
:
0.185 m
ACCEPT
REMEAS
4.7 FREE-CODING
Starts “Coding” to select a code from a code list or enter a new code. Same
functionality like soft key CODE.
4.8 CHECKING TIE
Calculation and display of the slope and horizontal distance, height difference,
azimuth, grade, and coordinate differences between the last two measured
points. Valid distance measurements are required for the calculation.