Sanding STS-752RC User Manual

Safety information regarding the internal EDM laser.

Identification of key physical components of the instrument.

Explanation of the instrument's screen interface and displays.

Description of the instrument's keypad layout and keys.

Functions assigned to the soft keys at the bottom of the screen.

Visual representation of the instrument's menu structure.

Procedures for setting up the instrument on a tripod and leveling.

Function to search for measurement points in internal memory.

Configuration of EDM modes, reflector modes, and prism constant.

Initiating the measurement process after settings are complete.

Enables electronic bubble and laser plummet settings for precise leveling.

Calculates angle/distance for targets with offsets.

Modifies key instrument settings like contrast, trigger key, user key.

Manages measurement data by creating and selecting jobs.

Sets the current station for coordinate calculations.

Manually sets or determines the Hz-direction orientation.

Defines points for stake-out, either by coordinates or manually.

Stake-out method using angle and distance offsets.

Calculations for traverse and inverse points.

Calculates intersection points using various methods.

Calculates tie distance using radial measurements from a central point.

Defines a baseline for stake-out or measurement.

Methods for defining a reference arc.

Tools for staking out points, arcs, chords, and angles relative to a reference arc.

Defines horizontal alignment elements like lines, curves, and spirals.

Defines vertical alignment based on chainage and elevation.

Stake out road alignments using defined horizontal and vertical data.

Sets up a new construction site for stake-out operations.

Compares measured points to the construction line.

Manages measurement jobs, including creation and deletion.

Manages known points database.

Manages measurement data, including viewing and deletion.

Manages codes for data classification.

Clears instrument memory.

Accesses data via PC using USB.

Manages data transfer via SD card.

Transfers data via USB cable.

Checks and adjusts the plate vial for leveling.

Checks and adjusts the circular vial for leveling.

Compensates for errors in vertical angle readings.

Adjusts for errors in the transverse axis.

Checks and adjusts the optical plummet.

Details on reflectorless EDM operation and safety.

Defines elements of a road alignment (straight, arc, transition).

Formulas for calculating road alignment parameters.