Sanding STS-752RC - Page 79

78
Set the 2
nd
base point and its prism height
with the methods above.
【Baseline Define】 1/3 ▼
Meas. Second Pt!
Point1
:
10
Point2
:
11
R.HT
:
1.000 m
:
----.--- m
Ⅰ
:
----.--- m
Mem.
All
SEARCH
LIST
↓
Then a Base Line is defined.
【Ref. Line Define】
Baseline Shifts!
△
:
1.369 m
Offset
:
0.000 m
Line
:
0.000 m
H/Z
:
0.000 m
Rotate
:
0°00′00″
NewBL
MEAS
STAKE
0SET
5.11.1.2 Reference Line
In the process of using base line, the base line can be offset longitudinally,
parallel and vertically or rotated. This new line is called the reference line. All
measured data refers to the reference line.