Sanyo PLC-HP7000L Service Manual

-27-
Mechanical Disassembly
10-2 Filter box disassembly-2
1 Remove 2 screws E (T3x8) and take the filter cover off.
2 Take the filter cover latch off by pulling it.
3 Remove 3 screws F (T3x8) and take the filter bottom cover off.
4 Take the filter switch board off, and remove 1 screw G(T3x8) and take the
filter round sensor board off.
5 Remove 2 screws H (T4x8) and filter motor off.
E
E
F F
F
G
H
H
Latch
Filter switch
board
Filter motor
Filter round
sensor board
Filter bottom
cover
Filter shaft
holder
F
Filter holder
cover

Sanyo PLC-HP7000L Specifications

General

Brand	Sanyo
Model	PLC-HP7000L
Category	Projector
Language	English