Sanyo PLC-WL2500 - Security Features (Key Lock & PIN)

55
Setting
ThisfunctionallowsyoutousethePINcodelockfunctionto
setthesecurityfortheprojectoroperation.
Setting
Security (Key lock and PIN code lock)
Keylock
Keylock
PINcodelock
Thisfunctionlocksthetopcontrolandremotecontrol
buttonstopreventoperationbyunauthorizedpersons.
 . . . . . Unlocked.
 . . . . . Locktheoperationofthetopcontrol.
Tounlock,usetheremotecontrol.
. . . . . Locktheoperationoftheremote
control.Tounlock,usethetopcontrol.
Ifthetopcontrolaccidentallybecomeslockedand
youdonothavetheremotecontrolnearbyorthereis
somethingwrongwithyourremotecontrol,contactthe
dealerwhereyoupurchasedtheprojectorortheservice
center.
Thisfunctionpreventstheprojectorfrombeingoperated
byunauthorizedpersonsandprovidesthefollowing
settingoptionsforsecurity.
Off . . . . . Unlocked.
On 1 . . . . . EnterthePINcodeeverytimeturningon
theprojector.
On 2 . . . . . EnterthePINcodetooperatetheprojector
oncethepowercordisdisconnected;as
longastheACpowercordisconnected,
theprojectorcanbeoperatedwithouta
PINcode.
WheneveryouchangethePINcodelocksettingorthe
PINcode(thefour-digitnumber),youarerequiredto
enterthePINcode.The"1234"issetastheinitialPIN
codeatthefactory.
IfyouwanttochangethePINcodelocksetting,Press
theSELECTbuttonandthePINcodedialogbox
appears.
PINcodelock