Sanyo PLC-WXE45 - How to Operate the On-Screen Menu

Menu bar
Pointer
(red frame)
Menu icon
Item data
PressthePoint◄►
buttonstoadjustthe
value.
SELECT
button
Pointer (red frame)
PressthePoint▲▼
buttonstomovethe
pointer.
Item
How to Operate the On-Screen Menu
On-Screen Menu
Quit
Exitthismenu.
TheprojectorcanbeadjustedorsetviatheOn-Screen
Menu.Foreachadjustmentandsettingprocedure,referto
therespectivesectionsinthismanual.
UsethePoint◄►buttonstoselectaMenuicon;use
thePoint▲▼buttonstoselectanitem.
PresstheSELECTbuttontoshowtheitemdata.To
adjustthedata,usethePoint◄►buttons.Refertothe
relevantpagesformoredetailsabouteachadjustment.
ToclosetheOn-ScreenMenu,presstheMENUbutton
again.
PresstheMENUbuttonontheremotecontrolto
displaytheOn-ScreenMenu.
Note:
The selected item is not active until the SELECT button is
pressed.
1
2
3
SELECT button
POINT buttons
Remote Control
MENU button
20
Press the SELECT button
heretodisplaynextitems.
Press the SELECT button
here to display previous
items.
Basic Operation