Sanyo PLC-WXE45 - Auto PC Adjustment

AutoPCAdjustmentfunctionisprovidedtoautomaticallyadjustFinesync,Totaldots,Horizontal,andVertical
positionstoconformtoyourcomputer.
Move the red frame pointer to the
Auto PC adj. item and press the
SELECTbutton.
“Pleasewait...”appearswhileAuto
PCadjustmentisinprocess.
PC Adjust Menu
PCAdjustMenuicon
To store the adjusted parameters
ThesystemparametersadjustedintheAutoPCAdjustment
canbestoredintheprojector.Onceparametersarestored,
thesettingcanbedonejustbyselectingaModeinthePC
SystemMenu(p.26).See“Store”onpage29,fordetails.
Note:
• Fine sync, Total dots, Horizontal, and Vertical positions of
some computers cannot be fully adjusted with this Auto
PC Adjustment function. When the image is not provided
properly with this operation, manual adjustments are
required (pp.28–29).
• The Auto PC Adjustment cannot be operated when 480i,
575i, 480p, 575p, 720p,1035i, or 1080i is selected in the
PC System Menu (p.26).
Auto PC Adjustment
PresstheMENUbuttontodisplaytheOn-Screen
Menu.UsethePoint◄►buttonstomovethered
framepointertoPCAdjustMenu.
1
2
UsethePoint▲▼ buttonstomovetheredframe
pointertoAutoPCadj.andthenpresstheSELECT
buttontwice.
Auto PC adj.
Menu Operation
TheAutoPCadjustmentfunctioncanbeoperateddirectly
withtheAUTOPCbuttonontheremotecontrol.
Remote Control
AUTOPCbutton
Direct Operation
27
Computer Input