Sanyo PLC-WXE45 - Page 29

UsethePoint◄►buttonstoadjustthehorizontalarea
displayedbythisprojector.
Display area H
UsethePoint◄►buttonstoadjusttheverticalarea
displayedbythisprojector.
Display area V
Reset
Store
ExitthePCAdjustMenu.
Quit
Tostoretheadjusteddata,select“Store”andthenpressthe
SELECTbutton.Movetheredarrowpointertooneofthe
Mode1to5inwhichyouwanttostore,andthenpressthe
SELECTbutton.
Toresettheadjusteddata,select“Reset”andpressthe
SELECTbutton.Aconfirmationboxappearsandthenselect
“Yes.”Alladjustmentsreturntotheirpreviousfigures.
Mode free
VacantMode
Values of “Total dots,”
“Horizontal,”“Vertical,”
“Display area H,” and
“DisplayareaV.”
Closethisdialogbox.
To store adjusted data
To clear adjusted data
Toclearthestoreddata,select“Modefree”andthenpress
theSELECTbutton.MovetheredarrowpointertotheMode
thatyouwanttoclearandthenpresstheSELECTbutton.
Note:
Display area (H/V) cannot be selected when 480i, 575i,
480p, 575p, 720p, 1035i, or 1080i is selected in the PC
System Menu (p.26).
T h i s M o d e h a s
storedparameters.
Movetheredframepointer
to an item and press the
SELECTbutton.
29
Computer Input