Sanyo PLC-WXE45 - Page 50

50
Settin�
Factory default
Thisfunctionreturnsallsettingvaluesexceptfortheuser
logo,PINcodelock,LogoPINcodelock,thelampcounter
andthefiltercountertothefactorydefaultsettings.
Factory default
ExittheSettingMenu.
Quit
Warnin� lo�
This function records anomalous operations while the
projectoris in operationanduse itwhendiagnosing faults.
Upto10warninglogsaredisplayedwiththelatestwarning
messageatthetopofthelist,followedbypreviouswarning
messagesinchronologicalorder.
Note:
 WhentheFactorydefaultfunctionisexecuted,allthe
warninglogrecordswillbedeleted.
Closed Caption
ClosedCaptionisafunctionthatdisplaystheaudioportion
ofaTVprogramas textonthe screen.If the input signalIfthe input signal
containsclosedcaptions,youcanturnonthefeatureand
switchthechannels.PressthePoint◄►buttonstoselect
CC1,CC2,CC3orCC4.
Iftheclosedcaptionisnotclear,youcanchangethetext
fromColortoWhite.
Closed Caption
 Note:
TheClosedCaptionisavailableonlyunderthesituation
below..
• When the input signal is NTSC of composite and•WhentheinputsignalisNTSCofcompositeand 
S-VIDEO,andthesystemissetaccordingtothe 
signalorseton"Auto".
•ThesystemmustbesetonNTSCorAutoinVideo
SystemSelection.(p.36)
•TheiconofClosedCaptionisdisplayedingray 
whileitisnotavailable.
• TheclosedcaptionisunavailablewhenOn-Screen
menuandP-Timeraredisplayed.
FactoryDefault
SelectFactorydefaultand
thisboxappears.Select
“Yes,”andthenextbox
appears.
Select“Yes”to
activateit.