Sanyo PLC-XP200L User Manual

20
NOTES ON LENS INSTALLATION
● Do not touch or remove any parts except the lens and related parts. It may result in
malfunctions, electrical shock, fire hazard or other accidents.
● Before installing or replacing the lens, check that the Model No. of the Projection Lens
matches to the projector.
● For details of the lens and installation, contact the sales dealer where you purchased the
projector.
Fit the lens to the projector. Make sure that the
lens is fully inserted to the projector.
While pressing the top cover release button on the
top cover, slide the top cover back to the projector.
1
3
Attaching the lens to the projector
Slide the light-block sheet in the groove to mount.
4
Push the Lens Lock Lever downward. Make sure
that the lens is properly locked.
5
Groove
Installation
2
Turn off the projector and unplug the AC power
cord.

Sanyo PLC-XP200L Specifications

General

Vertical scan range	48 - 100 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	±40 °
Lamp type	NSH
Lamp power	330 W
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
Bundled software	User Manual (CD ROM)
I/O ports	DVI-D (digital/HDCP) D-Sub15 (RGB/SCART-RGB) 5 x BNC (RGBHV/Composite/Y-Pb/Cb-Pr/Cr) 3 x RCA (Video/Y-Pb/Cb-Pr/Cr) Mini DIN 4 (S-Video) 3.5 mm Stereo Jack D-Sub15 D-Sub9 (RS232) 3.5 mm Stereo Jack (cable remote control) USB type B
Compatibility	UXGA SXGA SXGA+ WXGA XGA S-VGA VGA Mac
Dimensions (WxDxH)	370 x 440 x 187 mm
Power requirements	100 - 240 V
Power consumption (standby)	24.5 W
Power consumption (typical)	499 W
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Placement	Ceiling

Weight and Dimensions

Weight	11400 g
Package weight	15900 g