Sanyo PLC-XU305A - Top Control

10
Part Names and Functions
Top Control
⑨ LAMP REPLACE indicator
 Lightsyellowwhentheprojectionlampreachesits
endoflife(pp.64,72).
⑧ WARNING indicator
 –Lightsredwhentheprojectordetectsanabnormal
condition.
 –Blinksredwhentheinternaltemperatureofthe
projectorexceedstheoperatingrange(pp.61,72).
④ ON/STAND–BY button
Turntheprojectoronoroff(pp.20-22).
⑤ POWER indicator
 –Lightsredwhentheprojectorisinstand-bymode.
 –Lightsgreenduringoperations.
 –BlinksgreeninthePowermanagementmode
(p.53).
③ INPUT button
Selectaninputsource(pp.29-30,39-40).
⑥ MENU button
 OpenorclosetheOn-ScreenMenu(p.23).
② POINT ▲▼◄► (VOLUME +/–) buttons
 –SelectanitemoradjustthevalueintheOn-Screen
Menu(p.23).
 –PantheimageintheDigitalzoom+mode(p.38).
 –Adjustthevolumelevel(Point
◄►buttons)(p.26).
⑦ AUTO SETUP/CANCEL button
 –Correctverticalkeystonedistortionandadjust
computerdisplayparameterssuchasFinesync,
Totaldots,andPictureposition(pp.25,47).
 –DisplaytheimageinUSBthumbdriveorreturnto
themenubarinMemoryViewermenu.
 Refertotheowner'smanualof"Memory
Viewerfunction".
① SELECT button
 –Executetheselecteditem(p.23).
 –ExpandorcompresstheimageintheDigitalzoom
mode(p.38).
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩WIRELESS indicator
 Turngreenwhenthewirelesscommunicationis
establishedinthenetwork.
⑩