64
Maintenance and Cleaning
When the projection lamp of the projector reaches its end
of life, the Lamp replacement icon appears on the screen
and LAMP REPLACE indicator lights yellow.Replace the
lampwithanew one promptly.Thetimingwhen the LAMP
REPLACE indicator should light is depending on the lamp
mode.
Followthesestepstoreplacethelamp.
Lamp
For continued safety, replace with a lamp of the
same type. Do not drop a lamp or touch a glass
bulb!Theglasscanshatterandmaycauseinjury.
Allowaprojectortocoolforatleast45minutes
beforeyouopentheLampCover.Theinsideof
theprojectorcanbecomeveryhot.
CAUTION
Screw
UnplugtheACpowercord.Lettheprojectorcoolforat
least45minutes.
Loosenthethree(3)screwsthatsecurethelamp.Lift
thelampoutoftheprojectorbyusingthehandles.
1
3
Replacethelampwithanewoneandsecurethethree
(3)screws.Makesurethatthelampissetproperly.Push
thelampcoverandsecurethescrew.
4
Loosenthescrewandopenthelampcover.
2
ConnecttheACpowercordtotheprojectorandturn
ontheprojector.
5
Lamp Replacement
Handles
Screw
CAUTION
LampCover
Top Control
LAMP REPLACE
indicator
Lampreplacementicon
Note:
•WhenMode 2isselectedintheLamplifecontrolmenu,
iftheprojectionlampoftheprojectorreachesitsendof
life,thelampreplacementiconappearsonthescreen,
andtheprojectoristurnedoffautomaticallyafter3
minutes.
•TheLampreplacementiconwillnotappearwhenthe
DisplayfunctionissettoOff(p.48),during"Freeze"(p.27),
or"Noshow"(p.28).
Screw
Whenreplacingthelampbecauseithasstopped illuminating,thereisapossibilitythatthelampmaybe
broken.
Ifreplacingthelampofaprojectorwhichhasbeeninstalledontheceiling,youshouldalwaysassumethat
the lamp is broken, and you should stand to the side of the lamp cover, not underneath it. Remove the
lampcovergently.Smallpiecesofglassmayfalloutwhenthelampcoverisopened.Ifpiecesofglassget
intoyoureyesormouth,seekmedicaladviceimmediately.
CAUTION
Screw