Sanyo PLC-XU305A - Image Mode Selection

42
Image select Menu
SelectthedesiredimagemodeamongDynamic,Standard,
Cinema, Blackboard (Green), Colorboard, Image 1,
Image 2, Image 3 and Image 4 by pressing the IMAGE
buttonontheremotecontrol.
Standard
Picturemodeadjustedwithfinetone.
Cinema
Blackboard (Green)
Image 1–4
IMAGE button
Dynamic
Cinema
Image Mode Selection
Fortheimageprojectedonablackboard.
This mode help enhance the image projected on a
blackboard. This is mainly effective on a green colored
board,nottrulyeffectiveonablackcoloredboard.
Blackboard
(Green)
Dynamic
Standard
Remote Control
IMAGE button
Direct Operation
Forviewingpicturesinabrightroom.
Normalpicturemodepresetontheprojector.
Forviewingwiththe user presetimagemodeinthe Image
Adjust Menu (see pages 43-44). This Image memory is
provided in each computer, component and video input
source.
1
2
Menu Operation
Image 1
Image 2
Image 3
Image 4
Colorboard
Colorboard
Atthetimeofsimpleprojectiononthecoloredwall,you
cangettheclosecolorimagetothecolorimageprojected
onawhitescreenbyselectingthesimilarcolortothewall
colorfromthepresetfourcolors.
PresstheMENUbuttontodisplaytheOn-Screen
Menu.UsethePoint▲▼buttonstoselectImage
selectandthenpressthePoint►orSELECTbutton.
UsethePoint▲▼buttonstoselectthedesireditem
andthenpresstheSELECTbutton.
Video Input