47
Setting
Note:
•Auto Keystone correctsvertical distortion only,not
correcthorizontaldistortion.
•The
Auto Keystonefunctioncannotworkwhenthe
CeilingfeatureissetOnintheSettingmenu(p.52).
•Perfect correction of the image distortion cannot
be ensured with the Auto setup function. If the
distortion is not corrected properly by pressing the
AUTO SETUP/CANCEL button, adjust manually
by pressing the KEYSTONE button on the remote
control or selecting
Keystone in the Setting menu
(pp.25,48).
•Fine sync, Total dots, Horizontal and Vertical
positionofsomecomputerscannotbefullyadjusted
with the Auto PCAdjustment function. When the
image is not provided properly with this operation,
manualadjustmentsarerequired(pp.33-34.
Auto setup
Input search
This function detects the input signal automatically. When
a signal is found, the search will stop. Use the Point ▲▼
buttonstoselectoneofthefollowingoptions.
Off......Inputsearchwillnotwork.
On1.... Inputsearchworksunderthefollowingsituation.
–WhenpressingtheAUTOSETUP/CANCEL
buttononthetopcontrol.
–WhenpressingtheAUTOSET/CANCELbutton
ontheremotecontrol.
On2.... Inputsearchworksunderthefollowingsituation.
–Whenturningontheprojector by pressingthe
ON/STAND-BYbuttononthetopcontrolorthe
remotecontrol.
–WhenpressingtheAUTOSET/CANCELbutton
ontheremotecontrol.
–When pressing the AUTO SETUP
/CANCEL
buttononthetopcontrol.
–Whenthecurrentinputsignaliscutoff.*
* If the No show or Freeze function is active, cancel it to
activate the Input search. Itis also unavailable when On-
Screenmenuisdisplayed.
Auto PC adj.
On . . . . . . EnablesAuto PCAdjustment when pressing
the AUTO SET/CANCEL button on the
remotecontrolortheAUTOSETUP/CANCEL
buttononthetopcontrol.
Off . . . . . . DisablesAutoPCAdjustment.
Auto Keystone
Auto. . . . Alwaysworksandcorrectskeystone
distortionaccordingtotheprojector'stilt.
Manual . .WorksonlywhenpressingtheAUTOSETUP/
CANCELbuttononthetopcontrol.
Off . . . . . . DisablesAutoKeystone.
Auto setup
Note:
•While
Input searchissettoOn1orOn2,thestatusof
InputandLamparedisplayedeverytimethesignalis
switched.
•Onlythelastselectedinputsourcecanbedetected.
•IftheINPUTbuttononthetopcontrolorCOMPUTER,
VIDEOorNETWORKbuttonontheremotecontrolis
pressedduringInputsearchisinprogress,Inputsearch
willstopandgobacktothepreviousinputsignal.
•Input search, Auto PC adj. and Auto Keystone cannot be
set
Offatthesametime.
This function enables Input search,Auto Keystone correction
and Auto PC adjustment by pressing the AUTO SETUP/
CANCELbuttononthetopcontrol.Settingsforthosefunctions
canbealteredasfollows:
To Next Page
Loading...
