Sanyo PLC-XU305A - Connecting to a Computer

16
Installation
Connecting to a Computer
Cables used for connection
•VGACable(MiniD-sub15pin)*
•DVI-VGACable
•DVICable
•USBCable
•AudioCables
(*Onecableissupplied;othercablesarenotsuppliedwiththeprojector.)
Note:
 •InputsoundtotheCOMPUTER1/COMPUTER2AUDIOIN
terminalwhenusingtheCOMPUTERIN2/DVI-Iandthe
COMPUTERIN1/COMPONENTINterminalasinput.
 •WhentheAUDIOOUTisplugged-in,theprojector'sbuilt-in
speakerisnotavailable.
• USBcableconnectionisneededwhenoperatingthecomputer
withtheremotecontrolorusingthePAGE▲▼buttonsonthe
remotecontrol.
Unplugthepowercordsofboththe
projectorandexternalequipment
fromtheACoutletbeforeconnecting
cables.
ExternalAudioEquipment
Audiocable
(stereo)
Audiocable
(stereo)
MonitorInput
AudioOutput
COMPUTER2
AUDIOIN
AUDIOOUT
(stereo)
AudioInput
MonitorOutput
COMPUTER
IN2/DVI-I
DVI
cable
MONITOR
OUT
DVI
-VGA
cable
USBcable
VGA
cable
COMPUTER
IN1
VGA
cable
Monitor
Output