Sanyo PLC-XU305A - Input Source Selection (RGB(PC Digital), RGB(AV HDCP))

30
Computer Input
ChooseComputer 2 bypressingtheINPUTbuttononthetopcontrolorpresstheCOMPUTERbuttononthe
remotecontrol.
Beforeusingthesebuttons,correctinputsourceshouldbeselectedthroughMenuoperationasdescribed
below.
Input Source Selection (RGB(PC digital), RGB(AV HDCP))
Direct Operation
Menu Operation
Note:
 •HDCP (High-bandwidth Digital Content Protection) is
a system for protecting digital entertainment content
delivered by DVI (Digital Visual Interface) from being
copied.  The specification of HDCP is decided and
controlledbyDigitalContentProtection,LLC.Shouldthe
specificationbechanged,thisprojectormaynotdisplay
thedigitalcontentprotectedbyHDCP.
 •NetworkisfortheNetworkfunction.Seeowner’s
manual“NetworkSet-upandOperation”.
 •When the Input Search function is set to On1 or On2,
theinputsignalwillbesearchedautomatically(p.47).
COMPUTER button
Top Control
INPUT button
Remote Control
1
2
3
PresstheMENUbuttontodisplaytheOn-Screen
Menu.UsethePoint▲▼buttonstoselectInputand
thenpressthePoint►orSELECTbutton.
UsethePoint▲▼buttonstoselectComputer 2and
thenpressthePoint►orSELECTbutton.
UsethePoint▲▼buttonstoselectRGB(PC digital)
orRGB(AV HDCP)andthenpresstheSELECT
button.
Input Menu
Wired 1
RGB
RGB(PC digital)
Computer
2
Computer 1
Video
S-video
Computer 2
Computer 1
Computer 2
Network
Wired 1
RGB
RGB(PC digital)