Sanyo PLC-XU305A - Remote Control Functions

11
Part Names and Functions
㉖ NETWORK button

SelecttheNetworkinput.Seeowner'smanual“NetworkSet-upandOperation”and
owner'smanualof"Memoryviewer".
Note:
Toensuresafeoperation,pleaseobserve
thefollowingprecautions:
–Donotbend,drop,orexposetheremote
controltomoistureorheat.
–Forcleaning,useasoftdrycloth.Donot
applybenzene,thinner,spray,orany
chemicalmaterial.
Remote Control
①
⑦
⑭
⑩
⑳
④
㉑
⑱
②
⑧
⑨
⑬
㉓
⑯
⑤
⑥
⑪
⑫
⑲
㉒
⑮
③
㉔
㉕
㉖
② ON/STAND-BY button
 Turntheprojectoronoroff.(pp.20-22)
⑤ VIDEO button
 SelecttheVIDEOinputsource.(p.39)
⑥COMPUTER button
 SelecttheCOMPUTERinputsource.(pp.29-30,40)
⑬PAGE ▲▼buttons
Scrollbackandforththepagesonthescreenwhengivingapresentation.Touse
thesebuttons,connecttheprojectorandyourcomputerwithaUSBcable.(pp.9,16)
⑦INFO. button
 Operatetheinformationfunction.(p.60)
⑮D.ZOOM ▲▼buttons
 Zoominandouttheimages.(pp.27,38)
⑩ MENU button
 OpenorclosetheOn-ScreenMenu.(p.23)
⑯RESET/ON/ALL-OFF switch
 When using the remote control,set thisswitch to “ON.” Setit to “ALL OFF” for
power saving when it is not used.Slide this switch to "RESET" to initialize the
remotecontrol code orswitchSpotlight and Pointerto theLaserpointer function.
(pp.12-13)
⑱IMAGE button
 Selecttheimagemode.(pp.28,35,42)
⑲
MUTE button
 Mutethesound.(p.26)
⑧
KEYSTONE button
 Correctkeystonedistortion.(pp.25,48)
⑨Point ▲▼◄►(VOLUME
+/–
)
buttons
 –SelectanitemoradjustthevalueintheOn-ScreenMenu.(p.23)
 –PantheimageintheDigitalzoom+mode.(p.38)
 –Adjustthevolumelevel.(Point◄►buttons)(p.26)
㉑
NO SHOW button
 Temporarilyturnofftheimageonthescreen.(p.28)
⑫ LASER button
 –OperatetheLaserpointerfunction.Laserbeamisemittedwhilepressingthis
buttonwithin1minute.Whenusingthislaserpointerformorethan1minute,
releasetheLASERbuttonandpressitagain.(p.12)
 –DisplaythePointeronthescreen.(p.12)
① L-CLICK button
Actastheleftmousebuttonforwirelessmouseoperation.(p.13)
③ SIGNAL EMISSION indicator
Lightsredwhilethelaserbeamisbeingemittedfromthelaserlightwindowora
signalisbeingsentfromtheremotecontroltotheprojector.
⑪FREEZE button
 Freezethepictureonthescreen.(p.27)
⑭ LAMP button
 Selectalampmode.(pp.27,55)
⑳
P-TIMER button
 OperatetheP-timerfunction.(p.28)
㉒R-CLICK button
 Actastherightmousebuttonforwirelessmouseoperation.(p.13)
㉓ SELECT button
 –Executetheselecteditem.(p.23)
 – ExpandorcompresstheimageinDigitalzoommode.(p.38)
㉔PRESENTATION POINTER button
Moveapointeroftheprojectororapointerforwirelessmouseoperation.(pp.12-13)
㉕AUTO SET/CANCEL button
–CorrectverticalkeystonedistortionandadjustthePCdisplayparameters.(pp.25,47)
–DisplaytheimageinUSBthumbdriveorreturntothemenubarinMemoryViewer
menu.
Refertotheowner'smanualof"Memoryviewer".
④ LASER LIGHT window
Alaserbeamisemittedfromhere.(p.12)
⑰
⑰SCREEN button
 Selectascreenmode.(pp.28,37,45)