Sanyo PLC-XU305A - Video System Selection

41
Video Input
Video System Selection
1
AV System Menu (Video or S-Video)
AV System Menu (Component)
2
If the projector cannot reproduce proper video image,
selecta specificbroadcast signal formatfrom amongPAL,
SECAM, NTSC,NTSC 4.43,PAL-Mand PAL-N.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
The projector automatically detects an incoming video
signal,andadjustsitselftooptimizeitsperformance.
Iftheprojectorcannotreproducepropervideoimage,select
aspecificcomponentvideosignalformatamong480i, 575i,
480p,575p, 720p, 1035iand1080i.
Auto
COMPONENT VIDEO SIGNAL FORMAT
Video or S-Video
Component
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
WhenVideoSystemisPAL-MorPAL-N,selectthesystem
manually.
Auto
Note:
TheAVSystemMenucannotbeselectedwhenselecting
RGB (Scart).
System Component
PresstheMENUbuttontodisplaytheOn-Screen
Menu.UsethePoint▲▼buttonstoselectInputand
thenpressthePoint►orSELECTbutton.
UsethePoint
▲▼buttonstoselectVideo,S-videoor
Computer 1(Component)andthenpressthePoint►
orSELECTbutton.
3
UsethePoint▲▼buttonstoselectSystemandthen
pressthePoint►orSELECTbutton.UsethePoint▲
▼buttonstoselectthedesiredsystemandthenpress
SELECTbutton.