Sanyo PLC-XU305A - Screen Size Adjustment

37
Computer Input
Store
Thisprojectorhasthepicturescreenresizefunction,which
enablesyoutocustomizetheimagesize.
Screen Menu
Screen Size Adjustment
Providetheimagetofitthescreensize.
Normal
True
Provide the image in its original size. When the original
imagesize islargerthanthescreensize(1024x768),the
projectorenterstothepanningmodeautomatically.Usethe
Point▲▼◄►buttonstopantheimage.Whenadjusted,the
arrowswill turn red.When reachedtothe correctionlimits,
thearrowswilldisappear.
Full
Providethefullscreenimage.
Note:
 •TheScreenMenu,exceptfor
Normal andCustom,cannotbeoperatedwhen720p(HDTV),1035i (HDTV)
or1080i (HDTV) isselectedinthePCSystemMenu(p.31).
 •Thisprojectorcannotdisplayanyresolutionhigherthan1920x1200.Ifyourcomputer’sscreenresolutionis
higherthanit,resettheresolutiontothelowerbeforeconnectingtotheprojector.
 •Theimagedatainotherthan1024x768ismodifiedtofitthescreensizeininitialmode.
 •True,FullandDigital zoom +/–cannotbeselectedwhen480i,575i,480por575pisselectedinthePC
SystemMenu(p.31).
1
2
Tostoretheadjusteddata,selectStoreandpressthePoint
► or SELECT button. Use the Point ▲▼ buttons to select
onefromImage1to4andpresstheSELECTbutton.
A confirmation box appears and then select Yes. Stored
data can be called up by selecting an Image (1–4) in the
ImageModeSelectiononpage35.
Aconfirmationboxappearsand
thenselectYes
.
Wide
Providetheimagetofitthewidevideoaspectratio(16:9)by
expanding the image width uniformly. This function can be
usedforprovidingasqueezedvideosignalat16:9.
PresstheMENUbuttontodisplaytheOn-Screen
Menu.UsethePoint▲▼buttonstoselectScreenand
thenpressthePoint►orSELECTbutton.
UsethePoint▲▼buttonsselectthedesireditemand
thenpresstheSELECTbutton.