Sanyo PLC-XU305A - Page 34

34
Where to store?
Store
Vacant
Thismodehasstored
parameters.
Note:
 •Display area (H/V) cannotbe selected when 480i, 575i, 480p, 575p, 720p, 1035ior 1080i isselected inthe PC
SystemMenu(p.31).
 •PCadjustMenucannotbeselectedwhenComputer 2(PC digital)isselectedintheInputMenu(p.30).
PressSELECTbuttonto
storeadjusteddata
Valuesof
Total dots,Horizontal,
Vertical,Display area Hand
Display area V.
PressMENUbutton
toclosethisdialog
box.
Computer Input
Store
Tostoretheadjusteddata,select Store andthenpressthe
Point►ortheSELECTbutton.Movethehighlighttooneof
theModes1to5inwhichyouwanttostore,andthenpress
theSELECTbutton.
Mode free
Toclearthestoreddata,selectMode freeandthenpress
thePoint►ortheSELECTbutton.Movethehighlighttothe
ModethatyouwanttoclearandthenpresstheSELECT
button.
Reset
Toresettheadjusteddata,selectResetandpressthe
SELECTbutton.Aconfirmationboxappearsandthenselect
Yes.Alladjustmentswillreturntotheirpreviousfigures.
Mode free
Store