Sanyo SPW-C0705DZH8 - How to Copy Program Times; How to Copy Day Programs; Example of Day Program Copying; Example of Group Program Copying

How to Copy Day Programs
Example of Group Program Copying
(Copying group No. 1’s program into group No. 2)
Example of Day Program Copying
(Copying Monday’s program into Tuesday)
You can copy the already set program of one day into another day (Day Program Copying), as well as copy the
entire week programmed for one group into another group (Group Program Copying).
How to Copy Program Times
Press the PROG. COPY DAY button.STEP 1
The group No. and the over today’s day start
blinking and “CP-1” starts blinking in the present
time display area. In this state, select a group in
which to copy day programs, using the GROUP
button.
STEP 3
STEP 2 Select a source day program to copy.
Select a copy destination day.
When the schedule timer is ready for you to select a
copy destination day, “CP-2” starts blinking in the
present time display area, while the selected copy
source day blinks in the days of the week.
Therefore, select a day of the week as the copy
destination, using the DAY button.
Once having selected the copy source day, press
the SET button to set it. The display changes to key
you to select a copy destination day.
Every time the DAY button is pressed, the
moves across the days of the week display,
therefore select a day of the week that will serve as
the copy source.
3-78
Control of 3-WAY ECO-i SYSTEM
1
2
3
4
5
6
7
8
5. Schedule Timer
TD831143-00W-3WAY.indb78TD831143-00W-3WAY.indb78 2008/12/0110:26:452008/12/0110:26:45