Sanyo SPW-C0705DZH8 - How to Copy Group Programs

How to Copy Group Programs
STEP 1 Press the PROG. COPY GROUP button.
“CP-1” starts blinking in the present time display
area and “CP” (copy) starts blinking in the program
area to indicate the copy source.
Select a source group program to copy.STEP 2
Select a copy source group using the GROUP
button.
Select a copy destination group.STEP 3
After pressing the SET button, “CP-2” starts blinking
in the present time display area, the copy source
group No. set appears in the program area, and
“PA” (paste) starts blinking in the program area
to indicate the copy destination.
Select a copy destination group using the GROUP
button.
Once having selected the copy source group, press
the SET button to set it.
Enter the selected copy destination group.STEP 4
When the SET button is pressed, the number of the
copy destination group appears in the program No.
area.
If a group from numbers 1 to 4 was selected as the
copy destination group, that number appears in the
program area. If a group from numbers 5 to 8
was selected, that number appears in the program
area.
NOTE
3-80
Control of 3-WAY ECO-i SYSTEM
1
2
3
4
5
6
7
8
5. Schedule Timer
TD831143-00W-3WAY.indb80TD831143-00W-3WAY.indb80 2008/12/0110:26:452008/12/0110:26:45