Sanyo SPW-C0705DZH8 - Weekly Program Function; Checking Weekly Timer; Program Image Diagram

3-33
Control of 3-WAY ECO-i SYSTEM
1
2
3
4
5
6
7
8
3. Timer Remote Controller
Checking Weekly Timer
Set the weekly program assigning a given timer to each day of the week.
Maximum of 6 programs a day and 42 programs a week can be set.
Select the day and the TIMER number you want to program.
Program image diagram
Weekly Program Function
Vertical scale indicates the TIMER No.,
and horizontal scale indicates the day.
* If the day is changed, the TIMER No.
returns to “1”.
1. Press
to enter the program confi rmation mode
“
” and start setting.
Once you enter the program confi rmation mode, the
present day is indicated as TIMER No. “1”.
2. Select the day.
Press
and / to move the “ ” horizon-
tally on the day to select.
Press to move “ ” (fl ashing on the display) in the
order of : Su Mo Tu....
Press to move it in the order of : Su Sa Fr....
“– – : – –” is displayed when the program is not set.
3. Select a Timer number.
Press
/ to select a TIMER No. from 1 to 6.
Press to move up from 1.
Press
to move down from 6.
button
Select a section from
the 42 programs.
TIMER No.
1
2
3
4
5
6
Su Mo Tu We Th Fr Sa
31
TIMER No. 1~6
program CHeck
2
TD831143-00W-3WAY.indb33TD831143-00W-3WAY.indb33 2008/12/0110:26:302008/12/0110:26:30