Hold down the TIMER OFF button for more than
2 seconds
To turn the timer back ON, hold down the TIMER
OFF button for more than 2 seconds
During installation, the remote controller will be set to disable the timer for individual groups. In this state, the
timer is disabled only for the selected group, therefore press the GROUP button to confirm which group is
selected.
Once the timer has been disabled, programmed operations are not run until the below procedure is performed.
To halt programmed operation for one week or more, you can disable all timer programs.
The normal display returns.
Press the HOLIDAY button to enter the holiday.STEP 4
NOTE
goes out and the timer is enabled
from the next scheduled program.
appears on the display. The timer is
disabled from the next scheduled program.
3-83
Control of 3-WAY ECO-i SYSTEM
1
2
3
4
5
6
7
8
5. Schedule Timer
TD831143-00W-3WAY.indb83TD831143-00W-3WAY.indb83 2008/12/0110:26:462008/12/0110:26:46
To Next Page
Loading...
