Sanyo SPW-C0705DZH8 - Page 77

3-25
Control of 3-WAY ECO-i SYSTEM
1
2
3
4
5
6
7
8
RCS-XM18BG.WL
2-24. Accessories
2-25. Installing the Receiver Unit
No. Accessories Quantity
1
Receiver
2
1
No. Accessories Quantity
3
Remote Control Holder
1
4
AAA alkaline batteries
2
5
Tapping screw 4x16
2
6
Clamper
1
1Remote Controller
As the receiver can only be installed in the corner where the panel wire comes out, as shown in Fig. 3-32,
consideration should be given to orientation when fitting the panel to the indoor unit.
Twist off the circled area shown in Fig. 3-32 with pliers or similar.1.
Remove the suction grille and corner cover. (Fig. 3-33)
2.
Break off
Panel wire
Corner cover
Fig. 3-32 Fig. 3-33
Panel wire
2. Wireless Remote Controller
TD831143-00W-3WAY.indb25TD831143-00W-3WAY.indb25 2008/12/0110:26:262008/12/0110:26:26