115 English
DATE AND TIME SETTING
The digital camera will record the date and time an image or audio recording
is taken so that you can display them during playback. Therefore, before cap-
turing images, make sure the correct date and time are set.
Example: To set the clock to 7:30 p.m. on December 23, 2004
1 Display the Option Mode Screen (see page 36).
2 Select the clock set icon , and
press the SET button.
h The CLOCK SET menu appears.
h The current date and time settings
appear.
h Follow the procedures below to
enable or disable the date display
during playback, to set the display
format for the date, and to set the
date and time.
h To return to the Option Mode
Screen, press the MENU button, or
select “EXIT” and press the SET
button.
CLOCK SET
DATE
2004/03/01
00:00
TIME
DISP
EXIT
YMD
To Next Page
Loading...
Need help?
General
