123 English
POWER SAVE SETTING
Your camera has a “power save” function whereby the power automatically
turns off after a specified period of inactivity. The power save function works
to conserve the battery pack power when the camera is not being used, or to
prevent the battery pack from dying if the camera has accidentally been left
on. You can specify the elapsed time (standby time) before the power save
function is activated.
1 Display the Option Mode Screen (see page 36).
2 Select the power save icon ,
and press the SET button.
h The Power Save Setting Screen
appears.
BATT/CAM: Set the standby time for
the shooting modes
when the battery pack is
used.
BATT/PB: Set the standby time for
the playback modes
when the battery pack is
used.
EXT.PWR/
CAM.PB:
Set the standby time for
the shooting and play-
back modes when the AC
adaptor is connected.
EXIT: Return to the Option
Mode Screen.
POWER SAVE
BATT/CAM
min
min
min
BATT/PB
EXT.PWR/CAM.PB
EXIT
To Next Page
Loading...
Need help?
General
