English 34
Turning the power off
After capturing images
1 Close the lens cover.
h The power turns off.
h The LCD monitor and accessing
indicator turn off.
After playing back images
1 Set the main switch to a setting
other than [ ].
2 Close the lens cover.
h The LCD monitor turns off.
Turning the power on when the power save function is active
In order to save the battery pack power, the power save function will automat-
ically turn off the power after one minute of no use during shooting, or five
minutes of no use during playback (factory-preset setting).
i When the power save function is active, the power is restored after any of
the following operations:
The main switch is moved
The lens cover is closed once, then opened.
The shutter release button, MENU button or SET button is pressed.
i After the power save function has been active for 15 minutes, the power
will turn off completely.
i When the separately sold AC adaptor (model VAR-G7EX for the VPC-
J4EX, model VAR-G7E for the VPC-J4EX [for U.K.] and model VAR-G7U
for the VPC-J4) is connected, the power save function will become active
about 10 minutes after the camera is turned on (factory-preset setting).
i The user can specify the time elapsed before the power save function is
activated (see page 123).
i When the camera is connected to a computer or printer using the dedi-
cated USB interface cable, the power save function is disabled, and the
camera turns off after about 12 hours.
Lens cover
Main switch
LCD monitor
To Next Page
Loading...
Need help?
General
