English 94
EXPOSURE CORRECTION
When capturing images, you can make the image lighter or darker.
1 Set the camera to the EXPERT
shooting mode (see page 36), and
exit the Shooting Setting Screen or
Shooting Information Screen (see
page 96).
h Press the MENU button to exit the
Shooting Setting Screen or Shoot-
ing Information Screen.
2 Press [l] or [m] on the arrow button.
h The exposure correction bar
appears.
h At this point, you can press [l] or
[m] on the arrow button to adjust the
exposure.
HINT
i Exposure correction setting is canceled in the following cases:
When the pointer is set to the center position.
After the shooting mode is changed.
When the BASIC mode is set.
After the power is turned off.
i The exposure setting numerical value is shown at the left end of the expo-
sure bar. The exposure can be set to a value from –1.8EV to +1.8EV.
i While exposure correction is active, the accessing indicator in the view-
finder flashes green.
i You can also correct the exposure by selecting the exposure correction
icon on the Shooting Setting Screen.
Exposure correction bar
Pointer
Exposure cor-
rection setting
Darker Lighter
To Next Page
Loading...
