English 126
i When the highest image number on Card B (before replacing) is higher
than the highest image number on Card A: the file name of the next
recorded image continues from last file name recorded on Card B.
1 Display the Option Mode Screen (see page 36).
2 Select the file number reset icon .
3 Press the SET button.
h The File Number Reset Screen
appears.
4 Select “OFF”, and press the SET button.
h The file number reset function is deactivated.
NOTE
i Until the file number reset function is turned ON, consecutive file names
are assigned. It is recommended that the file number reset function be
returned to ON at the end of each photography session.
ON: The file number reset function
is on.
OFF: The file number reset function
is off.
Card A 0001, 0002...... 0012, 0013
Card B 00020, 00021, 00022, 00023, 00024, 0025, 0026
Previously recorded images
Replace card
FILE NO. RESET
ON
OFF
To Next Page
Loading...
Need help?
General
