141 English
CONNECTING TO A COMPUTER
3 Select the mode that corresponds to your intended use, and press
the SET button.
h Please connect the dedicated USB interface cable to your computer’s
USB connector. Do not connect it to the USB port on your monitor or
keyboard, or to the USB hub. Be especially careful when installing the
driver software. In some instances, it may not be possible to correctly
install the driver software.
h More information about these operations can be found in the instruc-
tion manual accompanying the included Sanyo Utility Software.
NOTE
i When the digital camera is set to the PC connection mode, no image is
shown on the LCD monitor.
To Next Page
Loading...
