Sanyo Xacti VPC-J4EX User Manual

English 168
Problem Cause Action
Reference
page
Shooting
The add voice
memo setting
turned off.
The voice
memo setting
automatically
turns off after a
voice memo is
recorded.
Set the add
voice memo
function to ON
again.
92
During video
clip shooting,
the zoom
movement
stops
momentarily.
The optical
zoom has
moved to the
maximum
magnification
position.
Not a
malfunction.
Release the
zoom switch,
and press it
again.
64
A voice memo
cannot be
added.
The camera is
set to a mode
other than the
still image
shooting
mode.
Set the camera
to the still
image
shooting
mode.
42
There is noise
in the captured
image.
The ISO
sensitivity
setting is too
high.
Set the ISO
sensitivity to a
lower setting.
84
The motion
alert icon is
shown on the
LCD display.
The shutter
speed is slow.
Stabilize the
camera with a
tripod or the
like.
44
Four images
were captured.
The camera is
set to the
sequential
shots shooting
mode.
Set the camera
to the still
image
shooting
mode.
42
LCD
monitor
When
capturing an
image, no
image is
displayed on
the LCD
monitor.
The LCD
monitor has
been disabled.
Change the
setting to
enable to LCD
monitor. 127
No playback
image
appears.
The main
switch is not
set to [ ].
Set the main
switch to
[].
68

Sanyo Xacti VPC-J4EX Specifications

General

Brand	Sanyo
Model	Xacti VPC-J4EX
Category	Digital Camera
Language	English