Sanyo Xacti VPC-J4EX - Page 173

English 170
Problem Cause Action
Reference
page
Viewing
images
The image is
too bright.
The forced
flash mode is
selected.
Select a
different flash
mode.
65
The subject
was too bright.
Use the
exposure
correction
function.
94
The ISO
sensitivity
setting is
incorrect.
Set the ISO
sensitivity to
.
84
The image is
not in focus.
The subject is
too close to the
digital camera.
Select the
correct focus
setting for your
needs.
61, 88
The focus
setting is not
correct.
The digital
camera moved
when the
shutter was
released.
Hold the digital
camera
correctly and
slowly press
the shutter
release button
halfway to lock
the focus.
Then press the
shutter release
button all the
way to capture
the image.
38, 43
The focus is
not locked
properly.
The lens is
dirty.
Clean the lens.
21