Sartorius Factory Series - Setting the Date and Time

11
Configuring the Scale: FC
Practical Example 2:
Setting the date and time
Step Key (or instruction) Display/Output
1. Select Setup:Input Press M, then
Display workstation ID the Input soft key
2. Select the time Press the q soft key
repeatedly
3. Enter the time 1 1 . 1 2
. 3 0
4. Set the selected time and restart
the clock Press the l soft key
5. Select the date Press the q soft key
6. Enter the date 1 3 . 0 3 .
9 7
7. Store the date Press the l soft key
8. Display other user data Press the q or Q soft key
– Lot number
– Weight set ID
– Calibration weight
– Time
– Date
– Display contrast
– Password
– ID name
– Three calibration/adjustment times
9. Exit Setup:Input
oo soft key