54
Configured Printout
Purpose
This menu item enables you to
configure individual printout formats.
With the formulation, totalizing
and statistics applications, you can
also define the values to be included
on the total printout when the MR key
is pressed.
Under “Setup: Printout: Application-
defined output: Configured printout”,
you can configure individual,
component or total data records that
contain the items available for
printouts in each application.
Configure these printouts after you
have configured the applications,
because some entries in the data
record depend on the particular
application.
Features
– Maximum items in a data
record: 60
– Separate configuration of printout
formats for individual weights,
components, total, backweighing
and statistics
– Individual printout generation:
press the p key
Automatic printout of application
data: results from animal weighing or
density application (Setup menu:
Application 1: Density: Printout: All
data) OK values from checkweighing
application, time-controlled printouts,
2nd tare memory
– Component printout:
For results from totalizing,
formulation or statistics
applications, press M+ or M-
(Setup: Application 3: ..., Printout
of individual components: On)
– Total printout: For totalizing,
formulation or statistics
applications, press MR
– Backweighing printouts or records:
automatically generated after
backweighing or manually by
pressing the p key when the
result is displayed at the end of
backweighing
– Statistics printout or output:To
generate, press the p key when
the statistics are displayed
Printouts for Differential Weighing:
These printouts can be generated as
standard or configured (user-defined)
reports.
You can configure the following
printouts:
– Individual printout
– Backweighing printout
– Statistics printouts
Printouts are generated in one
of two ways:
– at the request of the user by pres-
sing the
p key (print on request)
– automatically, if configured
in the Setup menu [Application
parameters: Application 1:
Differential weighing:
Generate printout: Auto]
You can turn off automatic printout
generation in the Setup menu
[Application parameters:
Application 1: Differential weighing:
Generate printout: None]
Data records are deleted after you
have switched to a different
application or activated or de-
activated an extra function in the
application parameters of the Setup
menu
– A new pick list for a data record is
created based on the currently
active application programs and
extra functions
– Printout items can be deleted
individually
– No printout is generated when the
following setting is configured:
Setup: Printout: Line format:
For raw data (16 characters)
– Print item “Form feed” for footer:
Advance to beginning of next label
in the "YDP01IS-Label" and
“YDP02IS-Label” interface mode
Extra Functions
§ Exit printout configuration: press
oo soft key
> Restart application
Printing “Select” and “List” Settings
– LIST: print the currently
selected list Select: printout
items that can still be selected
§ When the select bar is on
LIST or Select: press the
p key
> Printout (Example)
BACKW. PRINT.LIST
====================
Sample date
Net initial wt.
Backweighed res
Loss in %
====================
etc.
To Next Page
Loading...
Need help?
General