Sartorius Factory Series User Manual

58
Displaying Info
Purpose
This menu item enables you to have
information displayed about the
specific scale (“device”), as well as
“FlexPrint” information.
Displaying Device Information
§ Select the Setup menu:
press the M key
> “SETUP” is displayed:
§ Select “Device information”:
Repeatedly press the q soft key,
then press the O soft key
> Device information is displayed:
§ Print device information:
Press the p key
> Printout (Example)
--------------------
23.02.2000 13:02
Model FCA64EDE-HX
Ser. no. 91205355
Vers. no. 01-45-01
(Version of the operating program)
ID BECKER123
(User-ID)
--------------------
SETUP
INFO
DEVICE
--------------------
Version-no.:
01-45-01
(Version of the operating program)
Wgh. sys. vers:
00-20-11
(Version no. of the weighing cell)
Model:
FCA64EDE-HX
Serial no.:
91205355
--------------------
§ Return to SETUP overview:
press the o soft key
§ Exit Setup menu:
press the oo soft key
> Original settings are restored
Display Flexprint Information
§ Select the Setup menu:
press the M key
> “SETUP” is displayed:
§ Select “Info”:
press the
q soft key repeatedly
and then the O soft key
§ Select “FlexInfo”:
press the
q soft key and then
the O soft key
> The FlexPrint information is displayed,
with print instruction file name,
software ID and version number:
$ To select a particular print file name
with software ID (for example,
ID403), if desired:
press key
q or Q as required
> If the display shows ID--- :
The weight block for legal metrology
is not printed by this print file.
> Display of version number:
V.xx.xx.xx
Created by Sartorius:
V.S.xx.xx.xx
§ Return to SETUP overview:
press the o soft key
§ Exit Setup menu:
press the oo soft key
> The device returns to the previous
mode

Sartorius Factory Series Specifications

General

Brand	Sartorius
Model	Factory Series
Category	Scales
Language	English