Sartorius Factory Series User Manual

143
Operating the Scale
Product Data Memory
Purpose
With this function you can enter, store
and load data records for
initialization of applications, including
user-defined data.
You can use this function in
combination with a program from
Application 1 (e.g., counting,
weighing in percent), one from
Application 2 (checkweighing, time-
controlled functions) and extra
functions F4 and F5 (identifiers,
second tare memory).
Available Features
– Store up to 300 data records.
– Data records can be created,
stored or deleted individually.
– Press the
ProDat soft key to
display data records.
– Define a name for each data
record of up to 15 alphanumeric
characters; the desired location is
displayed in the product data
memory.
– Optional configuration in the
Setup menu to delete a single
character when entering a data
record name by pressing c.
Setup: ... Keypad: CF function for
input: Delete last character.
– Data records are displayed in
alphabetical order.
– Initialization data set for an
application (e.g., wRef, nRef)
is saved when you select
the Store option. This data is
loaded from the product data
memory when you access this
memory from the corresponding
application.
– Use alphanumeric input to search
for and display individual data
records.
– You can assign this function to
the fourth or fifth soft key (from the
right), i.e. F4 or F5.
– Error messages are displayed in
the text line in plain English.
– Press the Delete soft key to
delete a data record.
Loading Stored Data:
Data for the block printout is stored
in battery-backed memory. The first
time you put the scale into operation,
it must remain connected to power for
a full day. This data remains in
memory for approx. 3 months after
the equipment is disconnected from
AC power.
Factory Settings
No user-definable parameters.
Soft Key Functions
ProDat Toggle to data record
display
Delete Delete selected data
record
Load Overwrite the initialization
data with the selected
data record
Change Change the data in the
stored data record
New Create a new data record
(after entering a data
record name).
Store Store the current
application data under
the selected data record
name. If data already
exist for this data record,
a prompt asks whether
this data should be
overwritten.
No Answer no to cancel
a “delete” or “overwrite”
operation
Yes Answer yes to perform
the “delete” or “overwrite”
operation

Sartorius Factory Series Specifications

General

Brand	Sartorius
Model	Factory Series
Category	Scales
Language	English