82
Counting A
Purpose
With the Counting application, you
can determine the number of pieces
of approximately equal weight.
You can use this application program
in combination with a program
chosen from Application 2
(checkweighing, time-controlled
functions) and one from Application 3
(totalizing, formulation, statistics).
Features
– Optional scale configuration in
Setup for automatically initializing
this application and loading the
most recent reference sample
quantity “nRef” and average piece
weight “wRef” when you switch on
the scale (this is the automatic
setting when the scale is initialized;
Setup menu: Application
parameters: Auto-start app. when
power goes on: On).
– Reference sample quantity “nRef”
entered manually
– Average piece weight “wRef”
entered manually
– Storage of the current weight value
for the preset reference sample
quantity “nRef”, to be loaded when
the Counting program is initialized
– Setting the accuracy when the
reference sample weight “wRef” is
stored for calculating a piece count
– Automatic output of the quantity
and sample weight via the data
interface port after initialization or
reference sample updating while
running the Counting program
(Printout: Application-defined
printout: Auto print upon
initialization: All values)
– Toggling between piece count and
weight value by pressing the
Count. or Weigh. soft key
– Toggling between counting and
other applications using the D
key (for example, checkweighing)
Factory Settings
Accuracy when calculating piece
weight:
Display accuracy
Reference sample updating:
Automatic
Soft Key Functions
nRef Store value input as
reference sample quantity
wRef Store input value as
reference sample weight
Update Reference updating
criteria met; reference
updating can be
performed to optimize
the accuracy
Count. Toggle to the Counting
application
Weigh. Toggle to the Weighing
mode
Start Storage of the current
weight value for the preset
reference sample quantity
To Next Page
Loading...
Need help?
General