Sartorius Factory Series User Manual

40
Setting the Device Parameters
(DEVICE)
Purpose
This menu item enables you to
configure the scale to meet individual
requirements by selecting predefined
menu parameters in the Setup menu.
You can block access to the menu by
assigning a password.
Features
The device parameters are combined
in the following groups (1st menu
level):
– Password
– User ID
– Clock
– Interfaces
– Display
– Keys
– Extra functions
– Factory settings: only device
parameters
Factory Settings
Parameters: The factory settings are
identified by the symbol "ο" in the list
starting on the page after next.
Preparation
Display available device parameters
§ Select the Setup menu: press M
> SETUP is displayed:
§ Select “Device parameters”: use the
q and O soft keys
If no password has been assigned,
anyone can access the Setup menu
device parameters
If a password has already been
assigned:
> The password prompt is displayed
$ If access is blocked by a password:
enter the password using the
numeric and/or alphabetic keys
$ If the last character of the password
is a letter: conclude input by
pressing the a key
§ Press l to confirm the password
> Device parameters are now
displayed:
$ To select the next group: press the
q soft key (down arrow)
$ To select the previous menu item of
a group: press Q soft key (up
arrow)
$ To select the next sub-item within a
group: press the O soft key (right
arrow)
$ To select the previous group: press
the o soft key (left arrow)
$ Press l soft key to confirm the
selected menu item
Entering or Changing a Password
– Let’s assume that a password with
8 characters max. has already
been assigned to access the Setup
device parameters
§ Select the Setup menu: press M
> SETUP is displayed
§ Select parameters: Use the q
and O soft keys
> The password prompt is displayed:
$ Enter the password
$ Press the l soft key to confirm your
password and view the device
parameters
§ Write down your password here for
easy reference:
Password = ..............................
If you assign a password and then
forget what the word is:
$ Enter the General Password (see
Appendix)
$ Press the l soft key to confirm and
display the password
> The parameters are displayed
§ Select the device parameter
“Password”: If necessary, repeatedly
press q or Q , until you see
> Password: and any existing
password

Sartorius Factory Series Specifications

General

Brand	Sartorius
Model	Factory Series
Category	Scales
Language	English