55
Configuring the Scale: FCA
Practical Example:
Configure an Individual Printout for Counting Application to Include Dotted Line, Date/Time, Piece Count and Net Weight
Settings (changes in the factory settings required for this example):
Setup: Application parameters: Application 1: Counting
Exit the Setup menu: press the oo soft key
Then call Setup again and select: Printout: Application-defined output: Configured printout
Step Press key(s) Display/Output
(or follow instructions)
1. Select Setup menu, M, then
“Printout” q repeatedly and
O soft key
2. Confirm “Application-defined O soft key
output”
3. Select and confirm q soft key 3 x
“Configured printout” O soft key
4. Confirm “Indiv. printout” O soft key
5. Select “Dotted line” O, q, l soft keys
6. Select “Date/time” q soft key twice,
then l soft key
7. Select “Piece count” q repeatedly,
then l soft key
8. Select “Net weight” Q soft key repeatedly,
then l soft key
9. Exit “Printout configuration” oo soft kex
10. Perform weighing operations, p --------------------
then print 14.01.2000 09:19
Qnt + 598 pcs
N + 2003.13 g
To Next Page
Loading...
Need help?
General