138
Practical Example: FC Models
Include Company Address and Sample Lot Number on the Printout. Each Identifier Line begins with the Name. Include
This ID on Every Printout of the Net Value.
Settings (changes in the factory settings required for this example):
Setup: App(lication parameters): Extra function (F4): Identification codes
Setup: Input: ID1: Company
Setup: Input: ID2: Location
Setup: Input: ID3: Street
Setup: Input: ID4: Lot
Step Key (or instruction) Display/Output
1. If necessary:
turn on the scale e
2. Select “Extra Function (F4)” M
in the Setup menu App soft key
q soft key twice
O soft key
3. Select “Identifier” q or Q soft key;
repeatedly, if necessary
4. Confirm O soft key
5. Store choice of identifier and o soft key
access the main menu oo soft key
6. Select “ID1” Input soft key
q soft key 8 times
7. Enter name for ID1 a ... see also page 63
(here: COMPANY) a
8. Confirm
l soft key
To Next Page
Loading...
