Sartorius Factory Series - Page 31

31
Configuring the Scale: FC
Example:
Configure an Individual Printout for the Counting Application to include Dotted Line, Date/Time, Piece Count
and Net Weight
Step Key (or instruction) Display/Output
1. Access the Setup menu M, then the
and select “Configuration” Config soft key
2. Select “Individual printout” Indiv. soft key
3. Select “Blank line” O, q, l soft key
4. Select “Date/time” q soft key twice, then
l soft key
5. Select “Piece count” q soft key repeatedly, then
l soft key
6. Select “Net weight” Q soft key repeatedly, then
l soft key
7. Exit Setup “Configuration” oo soft key
8. Perform weighing operations, p
then press --------------------
14.05.1997 09:19
Qnt + 598 pcs
N + 2003.13 g