Sartorius Factory Series User Manual

47
Configuring the Scale: FCA
Setup – Application 1 Calculation Decimal places in None
Application (Basic settings) calculated result 1 decimal place
parameters ο 2 decimal places
3 decimal places
4 decimal places
5 decimal places
6 decimal places
Density
1)
Differential weighing Weighing sequence
2)
Individual weighing
Consecutive individual weighing
ο Combined weighing
Serial weighing
Tare weighing No
ο Yes
Result with None
decimal point 1 decimal place
ο 2 decimal places
3 decimal places
4 decimal places
5 decimal places
6 decimal places
Autosave ο Off
values On, first value at stability
On, last value at stability
On, value bet.
70 – 130% at stabil.
Minimum load None
for autosave ο 10 digits
20 digits
50 digits
100 digits
200 digits
500 digits
1000 digits
Save statistics ο No
Yes
Generate printout None
ο Automatic after backweighing
Auto. after initial weigh.
and backweighing
Automatic after tare-, initial-
and backweigh.
Include sample ID ο No
in text line Yes
Wg.seq key No
ο Yes
Clear sample after ο No
individual weight, result + Yes
and unload
Last residual weight is stored ο No
as initial weight (ashing) Yes
Applications 2 and 3 see following pages
1) = Instructions on density determination are available on the Internet, under http://www.sartorius.com/cgi-bin/wt/pdfdown.pl?todo=
Gruppenauswahl&art=&menu=en&sprache =english in the PDF file “Master
pro
LA”, or contact Satorius.
2) = Setting can only be changed when the program is initially run and when the Wg.seq. key option is set to “No”
Factory setting

Sartorius Factory Series Specifications

General

Brand	Sartorius
Model	Factory Series
Category	Scales
Language	English