Sartorius Factory Series User Manual

70
Preparation: FC Models
Set the parameters for calibration and adjustment; e.g., with automatic calibration/adjustment, isoCAL on
Step Key (or instruction) Display/Output
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
1. Switch on the scale e Sartorius logo
Self test
2. Select the Setup menu M
3. Select the Scale menu
Menu soft key
4. Confirm selection O soft key
of Scale functions
5. Select CAL/isoTST key function q soft key repeatedly
and confirm
O soft key
o = last setting selected
6. Select desired function q soft key, repeatedly,
and confirm (e.g., item 12) if necessary
l soft key
7. Exit CAL/isoTST key function o soft key

Sartorius Factory Series Specifications

General

Brand	Sartorius
Model	Factory Series
Category	Scales
Language	English