77
Operating the Scale
Define the Calibration Weight: FCA Models
Step Press key(s) Display/Output
(or follow instructions)
1. Select Setup menu M
2. Select “Balance/scale functions” O soft key
3. Select “Calibration/adjustment” O soft key
4. Select parameter for external q soft key 5 x
weight O soft key
5. Select “Cal./adj. wt.” q soft key
3000 = last setting selected
6. Enter calibration weight 5 0 0 0
(e.g., 5000 g)
and save
7. Save the calibration weight l soft key
8. Exit the Setup menu oo soft key
To Next Page
Loading...
Need help?
General