Sartorius Factory Series User Manual

99
Operating the Scale
Preparation
§ Turn on the scale: Press e
> Sartorius logo is displayed
§ Select the “Calculation” application program in the Setup menu: Press M
FC Models:
§ Select the Application menu:
App soft key
§ Select Application 1: O soft key
FCA Models:
§ Select
Application parameters: press the q soft key 2 x,
then the O soft key once
§ Select
Application 1 (basic settings): press the O soft key
§ Select
Calculation: Q or q soft key repeatedly
§ Confirm Calculation: O soft key
§ Select and confirm:
–
Decimal places in calculated result:
None or
1 decimal place or
2 decimal places or
3 decimal places or
4 decimal places or
5 decimal places or
6 decimal places
see also the “Application Menu (Overview)” in the chapter entitled
“Configuring the Scale”
§ Save settings and exit the Setup menu: Press oo soft key
Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring (not during
alphanumeric input),
– printing,
you can also access the following
functions from this application:
Calibration/Adjustment
§ Press the
isoTST soft key
> See “Calibration/Adjustment”
for further instructions
Toggling to the Next Application
§ Press D
> See the section on the
corresponding application pro-
gram for further instructions
Setup (setting parameters)
§ Press M
> See “Configuring the Scale”
for further instructions
Turning Off the Scale
§ Press e
> The scale shuts off
> The display goes blank

Sartorius Factory Series Specifications

General

Brand	Sartorius
Model	Factory Series
Category	Scales
Language	English