Operation 43
7.15.1 Loading Test Program from When loading test programs from internal memory, all test programs are displayed
Internal Memory (F1) in the program selection list. You can highlight the programs by entering the list
number or using the touch screen. There is an entry line “From ## to ##”above the
program list. In this line, you can highlight test program blocks.
Confirm your selection by pressing enter.
The highlighting can be removed with the button “Undo marking”.
The highlighted test program is displayed above the function keys F1-F4.
When test program blocks are highlighted, you can scroll through the selection
list with LIST UP|DOWN.
You can select the following functions:
F1: View
Display the parameters predefined in the test program along with
previously defined record data.
F2: Print
Print out the test program on the internal printer
F3: Save parameters to SD card
Save the test program to an SD card
F4: Save to network
Save the test program to the FTP server
F5: Save as program PLC 1
Save the selected program to memory location PLC 1
F6: Save as program PLC 2
Save the selected program to memory location PLC 2
F7: Delete
Delete the test program
7.15.2 Uploading Test Program With this function you can upload test programs previously archived on SD card
from SD card (F2) back into the Sartocheck
®
4 plus program database. Insert the SD card into the
Sartocheck
®
4 plus and press PAGE DOWN.
Fig. 7-32 | Program database: Internal memory
Fig. 7-33 | Program database
Fig. 7-34 | Program database: Load test program
To Next Page
Loading...
