Maintenance | Servicing 69
9. Troubleshooting 9. Troubleshooting
The work and instructions for “Troubleshooting” described in these operating
instructions are explained in such a way that they can be understood and
carried out by trained workers and qualified technicians (see Definition in
Chapter 3.3 “Safety Precautions”) in
– Electrical|Electronics
– Mechanical|Maintenance
This personnel must be provided with the appropriate tools and testing devices.
In particular-, when maintenance and repair work is being carried out, the shutdown
procedures (see Chapter 4.4) must be carried out under all circumstances. If the
measures listed do not succeed, please contact the Sartorius Stedim Biotech GmbH.
9.2 Troubleshooting Whenever errors occur, they appear on the display. Proceed as prompted by the menu
guidance and observe the following instructions:
The current procedure continues after confirmation. The user is prompted with the
following instructions:
– The current procedure has been stopped. A user decision is required and must
be confirmed before Sartocheck
®
4 plus continues to carry out or cancels the
procedure.
– The current procedure has been cancelled. The user receives the error code “Enter
elimination note” or the prompt to inform Sartorius Stedim Biotech Service.
If it becomes necessary to contact Sartorius Stedim Biotech Service,
please have the following information ready:
– Serial number
(see the back panel of Sartocheck
®
4 plus Filter tester test print out with header
display)
– Version
(see header display)
– The four-digit error code
9.1 Disposal and repair
instructions
To Next Page
Loading...
