Sartorius WZB25-NC - Active Print Menu Menu

Weigh Cell Operating Instructions 25
System Settings
7.9.2 “Active Print Menu” Menu
Level 1 Level 2 Level 3 Level 4 Codes
Active print
menu
Communication
parameters
Data output O Individual value without stability 3. 1. 1. 1
Individual value after stability 3. 1. 1. 2
Automatic, without stability 3. 1. 1. 4
Automatic, after stability 3. 1. 1. 5
Cancel auto. output O Cancel not possible 3. 1. 2. 1
Cancel via print command 3. 1. 2. 2
Cycle automatic
output
O Every value 3. 1. 3. 1
Every 2nd value 3. 1. 3. 2
Output format O 16 characters raw data 3. 1. 4. 1
22 characters with identification 3. 1. 4. 2
Print parameters Printout Manual, without stability 3. 2. 1. 1
O Manual, after stability 3. 2. 1. 2
Automatic, after load change 3. 2. 1. 6
Printout format O Application, with identification 3. 2. 2. 2
Printout appl.
parameters
Off 3. 2. 3. 1
O All parameters 3. 2. 3. 2
Only main parameters 3. 2. 3. 3
Printout GLP
protocol
O Off 3. 2. 4. 1
Only after cal./adjustment 3. 2. 4. 2
Always on, with every manual print 3. 2. 4. 3
PC direct
parameter
Decimal separator O Point 3. 3. 1. 1
Comma 3. 3. 1. 2
Output format O Text and numerical value 3. 3. 2. 1
Numerical value only 3. 3. 2. 2
O = Factory setting